.

Ο λόγος στασίμων 1:1 ενός κεραιοσυστήματος, δεν συνεπάγεται τον 1:1 λόγο μεταφοράς ισχύος, προς την κεραία!

Thursday 16 November 2017

Poor man's tower! An almost complete presentation.


When me and my technical team design the SHT-to-SHT* retractable antenna tower, we didn't take into account some things it could make my day and my climbing better and easier!
Like, the distance my leg has to rise when going from one step to the other is 30cm whereas it could be 25 OR I could have fit steps on both sides of the tube making the climb effortless.
Especially the last two of them MUST be in pair so to have a better stand and put your whole weight on both legs. Being there it's not a bad idea to ad another pair of steps so you can climb even higher and work above rotator cage level. IF YOU DARE!!!
The base plate of the tower is 15cm by 15cm whereas it could be, lets say 20x20 or ever 25x25 centimetres. There is no safety issue as it is now, simply it gives you extra confidence of stability.
The steps were made from mild steel angle iron 2x2x15 centimetres and they were uncomfortable for my foot to stay on for prolonged time.
So what was the upgrade about?!
For start I welded one more step to pair it with last one already existed at the top of the tube and then another pair welded even higher! All these three steps were made by the same materiel but of diferent size. 4x4x15centimetres this time.
I had thought that, while standing on the top step(single legged!) I could possibly lift the whole apparatus, SHT, rotator cage and Dipole using my own strength.
I was wrong because I am not that strong and the rest is too heavy!
There I thought the winch solution. I bought a 2500 lbs manual winch, strong enough to pull small boats ashore to use it as a puller or lifter. A good friend of mine(name withheld) provided me with two special type sliding door rollers and that was almost everything I needed to have.
After I made the necessary arrangements with a crane company, my Odyssey started.
The existed tower came to ground level sweet as a treat and that was the only easy thing.
I had to take it to the workshop I had initially construct it because of better welding technics and abundance of various metal bits and pieces I was going to need.

I welded one of the two rollers at the bottom of the sliding 40x40mm SHT and the other one atop of the 60x60mm SHT. Exactly opposite I welded a single chain ring as a secure point for the steel wire I was going to use.

The theory was, by pulling and rolling the steel wire on the winch drum, the inside SHT would slide outwards. Upwards in my case!
So it was although I had to run the wire, assembly and test it all by my own and no helping hand.
In the mean time I had to make a concrete block to rise the base of the tower due the roof insulation.
Then it was the imminent rain threat. It had to rain and consequently had to dry to pour the concrete for the insulation and then I had to wait for it to dry enough to ask the crane company to brink back my updated toy!

Luckily and after an almost complete month of worries and alot of go back and forth, the tower installed as it should.
And works as it should!
In between my trials of rising and lowering the inside SHT and the taller boom, 3meters tall now rather the 1.2meters which was before,  I found time to install also a 80m wire dipole barely noticed against the sky.

Some of the changes is not difficult to be seen in the photos where some others I'll take a photo of them given the opportunity.
The concept of an antenna tower and what was made off, started a couple of years earlier discussing with a friend of mine(name withheld). From all the available building materials and construction options it was accepted as a very easy, cheap and secure way to make a structure a.k.a. tower to keep one's antennas high in the sky!
Precious help was given by Sotiris SV1BDO, revealing to me the secrets of sliding steel hollow tubes. Tnx Sotiris!
A big thank you to Makis at the workshop for his expertise and the welding lessons. A big potato for his boss!  
*SHT for steel hollow tube.


Θεωρούσα ότι θα μπορούσα να σηκώνω ευκαιριακά τον μέσα κοιλοδοκό του πύργου μόνο με την δύναμή μου!

Τελικά το όλο σύστημα απαρτιζόμενο από την 6μετρη κοιλοδοκό, το κλουβί του ρότορα μαζί με αυτόν και η σωλήνα ύψους 1.20 και η κεραία ήταν πολύ βαριά για να το καταφέρω. Ειδικά όταν πατούσα στο ένα πόδι σε σιδερογωνιά πλάτους 2 εκατοστών και το μόνο βολικό πιάσιμο ήταν στο ύψος των ώμων.
Γιαυτό και κάποιες άλλες βελτιώσεις οι οποίες προέκυψαν στην πορεία, χρειάστηκε να κατεβάσω τον πύργο και να τον πάω στο μηχανουργείο.
Ξέχωρα από τα σκολιανά μου που άκουσα από τον Γιάννη Αφεντικό, η δουλειά που έκανε ο Μάκης στις κολλήσεις είναι καταπληκτική και σίγουρη!

Το εύκολο ήταν να προσθέσω μερικά σκαλοπάτια ακόμα, τρία τον αριθμό στην κορυφή, το ένα για να ζευγαρώσω το τελευταίο υπάρχον και τα άλλα δύο ακόμα υψηλότερα σε σημείο που αν το αντέχω να μπορώ να ανεβαίνω πιό πάνω κι από το κλουβί του ρότορα.
Για την ανύψωση τώρα, αγόρασα ένα μαγκάνι το οποίο χρησιμοποιούν για να έλκουν τα σκάφη επάνω στο τρέϊλερ κι ένας φίλος με βόλεψε δύο ράουλα γκαραζόπορτας για να τρέχει το συρματόσκοινο επάνω τους.
Το ένα ράουλο κολλήθηκε στο κάτω μέρος της μικρής κοιλοδοκού και το άλλο την κορυφή της μεγάλης. Απέναντι από αυτό κολλήθηκε κι ένας κρίκος αλυσίδας σαν σημείο αγκίστρωσης του συρματόσκοινου. Το σκεπτικό λειτουργίας είναι, τυλίγοντας το συρματόσκοινο στο μαγκάνι και μειώνοντας έτσι το μήκος του ο 40*40 κοιλοδοκός γλιστρά μέσα στον 60*60 και ανεβαίνει προς τα επάνω. Παρ' όλες τις αμφιβολίες μου για το τελικό αποτέλεσμα λειτουργεί καταπληκτικά κι αυτό σβήνει τα μύρια όσα προβλήματα και τρεξίματα είχα μέχρι να το καταφέρω! 

Το όλο εγχείρημα μου πήρε αρκετό καιρό διότι είχα να φτιάξω μιά τσιμεντένια βάση έτσι ώστε να σηκωθεί ο πύργος ψηλότερα όταν θα γύριζε από τις βελτιώσεις αλλά και γιατί ήταν στο πρόγραμμα να στρωθεί η κακής ποιότητας ταράτσα με μονωτικά Dow και νέο τσιμέντο.

Αστάθμητος παράγοντας σε όλα αυτά η βροχή η οποία αναμενόταν προς το τέλος Οκτωβρίου.
Ο Σωτήρης SV1BDO με βοήθησε με μερικές ιδέες του σχετικά με τους πτυσσόμενους πύργους του οποίους κατασκευάζει και τον ευχαριστώ κι από 'δω! 
Εν ολίγοις έτσι έχουν τα πράγματα κι αυτά έκανα για να βελτιώσω το πυργοσύστημά μου. Πιστεύω ότι οι φωτογραφίες είναι κατατοπιστικές κι όσες δεν κατάφερα να βγάλω, θα το κάνω με την πρώτη ευκαιρία.



No comments:

Post a Comment

Ονομάζομαι Τάκης Περρέας και αυτό είναι το προσωπικό μου ιστολόγιο, όπου “ιστολόγιο” το Δικτυακό ημερολόγιο!
Εδώ γράφω τις απόψεις μου, τις θέσεις μου, τις μελέτες μου και γενικά ό,τι έχει να κάνει μ' εμένα!
Δεν ζω από το ιστολόγιο, αντίθετα μου αφαιρεί αρκετό χρόνο από την καθημερινότητά μου. Δεν περιμένω να πλουτίσω λοιπόν ούτε από επισκέψεις, ούτε από “κλικ” σε σελίδες!
Με δεδομένη την ανυπαρξία σχολιασμού και ερωτήσεων, επιτρέπω πιά, μόνο σε μέλη να κάνουν σχόλια και ερωτήσεις. Στην περίπτωση που πραγματικά θέλετε να σχολιάσετε ή να ρωτήσετε, στείλτε ένα e-mail για να εγγραφείτε αυτόματα μέλος!
Κάντε όσες τεχνικές ερωτήσεις θέλετε και θα προσπαθήσω να απαντήσω σε όλες με τον καλύτερο και επεξηγηματικότερο τρόπο.
Αυτός είναι ο λόγος άλλωστε, για τον οποίο το ξεκίνησα (άσχετα αν μερικές φορές εγώ ο ίδιος ξεμακραίνω)!